|
Untitled Document
|
|
|
Pyle PLAM1600 1600 Watts 4 Channel Bridgeable Amplifier | 
 enlarge | Brand: Pyle
Category: Car Audio or Theater
Department: Car Amplifiers
List Price: $131.96
Buy New: $70.44
You Save: $61.52 (47%)
New (10) Refurbished (1) from $67.79
Rating:  4 reviews
Sales Rank: 35005
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 7.4
Dimensions (in): 17.9 x 10.6 x 3.1
MPN: PLAM1600
Model: PLAM1600
UPC: 068888892773
EAN: 0068888892773
ASIN: B001LOOBJU
Promotion: Data not available Terms and Conditions
Availability: Usually ships in 4-5 business days
| |
| Features:
| • | Four Channel Bridgeable Amplification - 1600 Watts Total System Output @ 4 Ohms - High Level Low Impedance MOLEX Input Connector - Frequency Response:15Hz-30kHz - LED Diagnostic Condition Indicator | | • | Tri-way Configuration:4/3/2 Channels - Variable Gain Control - RCA Low Level Inputs - Overload Protection - Automotive Type Fuse Protection | | • | 4 X 400Watts Total Output @ 4 Ohms - MOSFET Pulse Width Modulated Power Supply - Speaker Output Terminal Strip - Thermal Protection - Dimensions: 11.02''L 9.76''W 2.26''H | | • | 2 Ohm Stereo Stable - Signal/Noise Ratio 90dB - Short Circuit Protection | | • | Built-In Variable Subwoofer Crossover - THD Less Than 0.04% - Power On LED Indicator |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
o
|
| Customer Reviews:
 Pyle blatantly lies about wattage. April 17, 2010
Peachan123 (Kennewick, WA)
So its a well known fact that most amp makers "fib" about the amount of wattage that is produced by their products. In this, Pyle is no different. This 4 channel amplifier supposedly has 400 watts per channel peak. After reading their own manuals technical specs, I had to put on some waders, because the BS was getting very thick. Their RMS for 4 channels at 4 Ohms is 35w per channel, and 55w per channel at 2 Ohms. I'm willing to bet, that at this amps peak performance, that it would fall well short of 1600 watts. You truly do get what you pay for.
 total garbage March 15, 2010
tony (Cocoa, Fl.)
There is NO way this amp puts out 1600 watts. I was a car electronics installer for three years and this amp should be rated at 16 watts. My stereo puts out more power without this amp. Don't waste you money on this amp.
trial and error December 15, 2009
Marcos Lopez
2 out of 3 found this review helpful
bought this amp to see what pyle was about. At first it sounded good but after 5 minutes it shut off. I cut the power off and it worked for another 5 min. Amazon sent me a replacement but this one was defective in a different way. One channel sounded great but another barely pushed any sound out. Amazon sent me UPS labels I shipped them both back and got a full refund(thanks Amazon).
 Pyle Amp's impress me once again!!! October 30, 2009
C. White
7 out of 7 found this review helpful
I have this amp pushing my 6X9's in the back and my 6 1/2" up front and they sound amazing with no problem whatsoever! I have a 1600 watt Pyle 2-channel pushing my sub. I personally think these are excellent amp's for the money! I dont push it real hard like some people might do but I have no concerns if I should ever decide to.
Pyle makes quality amp's with a budget in mind!! -----Give Pyle a try!!-----
|
|
|
Powered by Home Hardware | |
